Single Disc Scrubbing Machine 17″ 154 RPM (SB 143 L13) – Made in Italy

Description

Single Disc Scrubbing Machine 17″ 154 RPM (SB 143 L13) – Made in Italy

Italy’s Most Powerful 17″ Low-Speed Scrubber — 1300W Deep Cleaning Performance

The Single Disc Scrubbing Machine 17″ SB 143 L13 is the high-power variant in the SB 143 single disc scrubbing range — built in Italy for professional cleaning operations that demand maximum low-speed scrubbing performance. Sharing the same proven 430 mm working width, 154 RPM pad speed, and 40.08 g/cm² brush pressure as its sibling the SB 143 L10, the L13 steps up with a significantly more powerful 1300W motor — delivering stronger, more sustained torque for the most demanding stripping, deep scrubbing, and floor restoration tasks across the UAE and GCC.

SB 143 L13 vs SB 143 L10 — What’s the Difference?

Both machines share the same platform, dimensions, brush speed, and brush pressure. The key distinction is motor power:

For facilities with heavily soiled floors, frequent stripping requirements, or extended daily scrubbing schedules, the SB 143 L13’s 1300W motor provides the additional power reserve needed to maintain consistent performance under sustained load — without risk of motor strain or overheating.

Key Features

⚡ Upgraded 1300W Heavy-Duty Motor The 1300-watt motor is the defining upgrade of the L13 over the L10. It delivers 30% more power, providing stronger torque at 154 RPM for tackling the most demanding floor restoration tasks — from stripping multiple layers of old wax and sealers to deep scrubbing heavily contaminated industrial or commercial floors without performance compromise.

🔄 154 RPM Dedicated Low-Speed Operation At 154 RPM, the SB 143 L13 applies maximum brush dwell time to the floor surface — the fundamental principle behind effective deep scrubbing. The slow rotational speed allows the pad or brush to penetrate deeply into surface contamination, breaking down ingrained soil, old coatings, and stubborn stains more effectively than any high-speed machine can achieve.

⚖️ 40.08 g/cm² Brush Contact Pressure The precisely calibrated brush pressure of 40.08 g/cm² ensures firm, consistent pad engagement across the full working surface. Combined with the 1300W motor’s stronger torque output, this pressure level delivers an exceptionally thorough scrubbing action — even on the most resilient floor contamination.

📐 430 mm Working Width The 17-inch (430 mm) brush diameter provides solid floor coverage per pass while maintaining the compact, manoeuvrable footprint that makes single disc machines practical in corridors, washrooms, and furnished commercial spaces.

🪶 41 kg Operational Weight The 41 kg machine weight provides the structural stability needed for effective low-speed scrubbing — maintaining consistent brush contact with the floor throughout each pass — while remaining practical for daily operator use without excessive fatigue.

🔌 220–240V Universal Voltage Fully compatible with UAE and GCC standard power supply (220–240V / 50Hz), the SB 143 L13 is ready to operate immediately with no special electrical setup or modifications required.

🇮🇹 Made in Italy Italian manufacturing precision ensures every component of the SB 143 L13 is built to withstand intensive daily professional use — delivering long service life, consistent performance, and low total cost of ownership backed by Dubai Cleaning Equipment’s local UAE support network.

When to Choose the 1300W L13

The upgraded motor of the SB 143 L13 makes it the preferred choice in the following scenarios:

• Multi-layer stripping — Where multiple coats of wax, sealer, or finish need to be removed in a single session
• High-frequency daily use — Facilities running extended cleaning shifts where motor endurance is critical
• Heavily contaminated floors — Industrial, warehouse, or high-footfall commercial floors with deep-set soiling
• Large floor areas — Where continuous operation over long periods demands a motor with greater power reserve
• Demanding restoration projects — Where maximum scrubbing effectiveness is required to achieve the desired finish

Ideal Applications

• Heavy-duty stripping of wax, sealers, and floor coatings
• Deep scrubbing of heavily soiled and high-traffic floors
• Floor restoration and surface refinishing projects
• Washroom and wet area intensive scrubbing
• Hotels, resorts, and large hospitality venues
• Hospitals, clinics, and healthcare facilities
• Shopping malls and high-footfall retail environments
• Warehouses and light industrial facilities
• Airports, terminals, and transit hubs
• Schools, universities, and large public institutions
• Marble, granite, terrazzo, vinyl, and sealed concrete surfaces

Pad & Brush Compatibility

The SB 143 L13’s low-speed, high-pressure, high-torque operation is optimised for the following pad and brush types:

• Black pad — Aggressive stripping and heavy-duty scrubbing
• Brown pad — Medium scrubbing and deep soil removal
• Green pad — General scrubbing and light stripping
• Scrubbing brush — Deep grout lines, textured floors, and uneven surfaces

Made in Italy — More Power. Same Precision.

The SB 143 L13 takes everything that makes the SB 143 platform a trusted professional tool — Italian build quality, precise brush pressure, low-speed scrubbing effectiveness — and adds the power reserve that the most demanding cleaning operations require. For UAE facility managers and cleaning contractors who will not accept compromise on deep cleaning performance, the SB 143 L13 is the machine of choice. Dubai Cleaning Equipment supplies this premium Italian scrubbing machine with competitive pricing, expert product support, and fast delivery across the UAE.

Get a Quote Today

Need maximum scrubbing power for your floor restoration or daily cleaning programme? Contact the Dubai Cleaning Equipment team today for pricing, availability, and a free product consultation.